Products – Nanoindentation Testers

FISCHERSCOPE® HM2000 S with NEW HT2000 Head

Cost-effective nanoindentation testers for determining the Martens hardness HM, characteristic elastic quantities and additional material parameters in the micro and nanometer range, using the instrumented indentation test according to ISO 14577-1 and ASTM E 2546.

  • NEW HT2000 Head indicates if power is on and if a constant temperature is reached
  • Ample load and depth range; can be used for a broad range of applications from polymeric automotive clear coats to ceramic diamond-like carbon coatings
  • Compact design makes the HM2000 S an ideal tool for all environments

[toggle Title=”Learn More”]

  • Most samples can be measured quickly and without special sample preparation
  • Good thermal stability allows for measurement of rate-dependent material properties of polymers
  • Vickers, Berkovich, spherical and custom indenters are available
  • Solid granite base with specialized vibration isolation silicone feet to reduce noise
  • Easy operation through the customizable WIN-HCU® Software

[/toggle]


FISCHERSCOPE® HM2000 with NEW HT2000 Head

Feature-packed,  user-friendly nanoindentation testers to measure hardness in MPa, Vickers and Martens, elastic modulus,  creep and much more of coatings and bulk material.

  • NEW HT2000 Head indicates if power is on and if a constant temperature is reached
  • Ample load and depth range; can be used for a broad range of applications from polymeric automotive clear coats to ceramic diamond-like carbon coatings
  • Motorized z-axis and fully-automated surface detection for higher productivity

[toggle Title=”LEARN MORE”]

  • Enhanced high resolution optical system with autofocus and multiple objective turret
  • Custom granite structure for enhanced frame stiffness and low noise floor
  • Measure on smallest structures, cross-sections with high- precision programmable XY-table
  • Minimal sample preparation due to large working area and open layout
  • Vickers, Berkovich, spherical and custom indenters are available
  • Optional: Active damping table to reduce influence of vibrations
  • Easy operation through the customizable WIN-HCU® Software

[/toggle]


PICODENTOR® HM500

RS349_PICODENTOR HM500_offen-lprNext generation of high precision user-friendly nanoindentation testers to measure nanomechanical properties such as hardness, elastic modulus, creep and much more of coatings, and surfaces.

  • High resolutions for load (≤ 1 μN) and distance (40 pm); PICODENTOR® can be used for a broad range of applications
  • Motorized z-axis and fully-automated surface detection for higher productivity
  • Enhanced high resolution optical system with autofocus and multiple objective turret

[toggle Title=”LEARN MORE”]

  • Custom granite structure for enhanced frame stiffness and low noise floor
  • Measure on smallest structures, cross-sections with high- precision programmable XY-table
  • Minimal sample preparation due to large working area and open layout
  • Vickers, Berkovich, spherical and custom indenters are available
  • Advanced vibration isolation with piezoelectric sensory technology
  • Optional Integrated Atomic Force Microscopy capabilities
  • Easy operation through the customizable WIN-HCU® Software

[/toggle]

Contact US